t qp369184 dc- 6 ghz gain block applications ? ? catv / satv / moca ? poi nt to point ? defense & aerospace ? test & measurement equipment ? general purpose wireless t product features ? ? ? ? flat, broadband frequency response ? 20.3 db gain at 19 00 mhz ? 3.9 db noise figure at 19 00 mhz ? +28.5 dbm output ip3 at 19 00 mhz ? +15.5 dbm p1db at 19 00 mhz ? 50 ohm cascadable gain block ? single supply, 45 ma current ? sot - 363 package functional block diagram pin configuration pin no. label 3 rf in 6 rf out 1, 2, 4, 5 gnd general description the tqp369184 is a general - purpose buffer amplifier that offers high dynamic range in a low - cost surface - mount package. at 1900?m hz, the amplifi er typically provides 20.3 db gain, +28.5 dbm oip3, and 3.9 db noise figure while drawing 45 ma current. the device combines dependable performance with consistent quality to maintain mttf values exceeding 100 years at mounting temperatures of +85 ? c. the device is housed in a lead - free/green/rohs - compliant industry - standard sot - 363 package. the tqp369184 consists of a darlington - pair amplifier using the high reliability ingap/gaas hbt process technology. only dc - blocking capacitors, a bias resistor, and an inductive rf choke are required for operation. this broadband mmic amplifier can be directly applied to various current and next generation wireless technologies such as cdma, w - cdma, and lte. in addition, the tqp369184 will work for other applicat ions within the dc to 6 ghz frequency range. ordering information part no. description tqp36918 4 ingap/gaas hbt gain block tqp36918 4 - pcb 500 - 6000 mhz evaluation board standard t/r size = 300 0 pieces on a 7 ? reel datashe et: rev . e 0 8 / 1 8 /14 - 1 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369184 dc- 6 ghz gain block recommended operating conditions parameter min typ max units t case ? absolute maximum ratings parameter rating storage temp erature ? ? rf input power, cw, 50, t=25 ? ? electrical specifications test conditions unless otherwise noted : i cc = 45 ? ? c, 50 system parameter conditions min typ max units operational frequency range dc 6 000 mhz test frequency 1900 mhz gain 18.8 20.3 21.8 db input return loss 15 db output return loss 24 db output p1db +15.5 dbm output ip3 pout=0 ? dbm/tone, f= 1 ? ? ? ? ? - 2 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369184 dc- 6 ghz gain block s - parameters test conditions: v c c =+3.9 ? v (typ.), i cc =45 ? ma (typ.), t case =+25 ? c, 50 ? system, calibrated to device leads freq ( m hz) s11 (db) s11 (ang) s21 (db) s21 (ang) s12 (db) s12 (ang) s22 (db) s22 (ang) 10 - 32.5 - 177.9 22.6 179.6 - 24.1 0.9 - 35.7 85.5 20 - 31.3 178.1 22.6 179.2 - 24.0 0.4 - 41.7 59.7 50 - 30.7 168.6 22.6 178.0 - 24.2 0.0 - 58.8 111.5 100 - 29.9 152.6 22.6 176.2 - 24.1 - 0.4 - 54.6 - 176.0 200 - 27.9 131.8 22. 5 172.5 - 24.2 0.7 - 60.3 133.2 500 - 23.9 102.6 22.3 162.2 - 24.2 1.7 - 41.7 104.5 900 - 20.3 77.3 21.9 149.2 - 24.2 2.6 - 45.1 135.2 1000 - 19.9 73.3 21.8 145.9 - 24.1 3.4 - 52.6 109.9 1500 - 17.2 47.4 21.1 131.1 - 24.2 4.1 - 39.7 - 28.7 1900 - 15.7 26.3 20.5 120.0 - 24.2 5.1 - 26.2 - 35.1 2000 - 15.1 21.0 20.3 117.4 - 24.2 5.5 - 24.6 - 39.5 2500 - 12.4 - 5.3 19.4 105.2 - 24.4 6.5 - 18.2 - 46.9 3000 - 10.0 - 17.9 18.5 94.3 - 24.7 7.3 - 14.6 - 43.4 3500 - 9.0 - 24.3 17.6 85.2 - 24.9 8.7 - 12.9 - 40.9 4000 - 8.5 - 27.4 16.9 77.1 - 24.9 1 2.1 - 12.9 - 36.9 4500 - 9.1 - 27.6 16.5 69.6 - 25.0 14.4 - 14.7 - 31.4 5000 - 10.8 - 26.9 16.2 61.0 - 24.9 17.4 - 20.0 - 16.1 5500 - 14.5 - 28.1 16.1 51.2 - 24.8 20.0 - 25.7 73.4 6000 - 22.4 - 51.2 15.9 39.3 - 24.9 20.7 - 17.1 126.2 notes: 1. measured on tqp36918 4 - pcb with l1 removed and c2, c3 replaced with 0 resistors. 2. bias applied to device output via internal network analyzer wide - band bias tee. 3. solt ecal at network analyzer test cable ends . 4. input and output reference planes extended to the device leads. datashe et: rev . e 0 8 / 1 8 /14 - 3 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369184 dc- 6 ghz gain block tqp36918 4 - p cb evaluation board c2 c1 l1 c3 j4 j3 r1 q1 q1 j2 rf output j4 gnd j3 vcc 3 1,2,4,5 6 j1 rf input l1 39 nh r1 24 ? c3 56 pf c2 56 pf c1 0.018 uf notes: 1. see evaluation board pcb information section for material and stack -up. 2. all components are of 0603 size unless otherwise stated. bill of material ? tqp36918 4 - pcb reference des. value description manuf. part number q1 n/a high linearity lna gain block triquint tqp36918 4 c1 0.018 uf cap, chip, 0603, 16v, x7r, 10% various c2, c3 56 pf cap, chip, 0603, 50v, npo, 5% various l1 39 nh inductor, 0603, 5%, cs series coilcraft 0603cs - 39nxjl r1
res, chip, 0805, 1/1 0w, 5% various component values for specific frequencies frequency (mhz) 50 500 900 1900 2200 2500 3500 l1 820 nh 220 nh 68 nh 27 nh 22 nh 18 nh 15 nh c2, c3 .018 uf 1000 pf 100 pf 68 pf 68 pf 56 pf 39 pf bias resistor values for various supply v oltages v supply (v) 5 6 7 8 9 10 12 r1 24
47
68
91
110
130
180
component size 0805 1206 1210 1210 1210 2010 2010 datashe et: rev . e 0 8 / 1 8 /14 - 4 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369184 dc- 6 ghz gain block typical performance ? tqp36918 4 - pcb test conditions unless otherwise noted: v supply =+5 v, r 1 = 24 , i cc = 45 ma, t case = +25 c parameter typical value units fr equency 500 900 1900 2100 2600 3500 4000 5000 6000 mhz gain 22.2 22.0 20.3 20.0 19.0 17.6 16.9 16.2 15.9 db input return loss 20 32 15 13 10 9 9 11 22 db output return loss 15 21 24 18 14 13 13 20 17 db output p1db +16.4 +16.2 +15.5 +15.5 +15.5 +15.3 + 14.4 +13.6 +11.4 dbm oip3 +30.0 +29.8 +28.5 +28.4 +27.4 +27.4 +26.5 +23.3 +23.4 dbm noise f igure 3.8 3.8 3.9 3.9 4.0 4.2 4.1 3.9 4.2 db notes: 1. oip3 measured with two tones at an output power of 0 dbm / tone separated by 1 mhz . performance pl ots ? tqp36918 4 - pcb test conditions unless otherwise noted: v supply =+5 v, r 1 = 24 , i cc = 45 ma, t case = +25 c b c +25 c ?40 c pt t o b pt t o c +25 c ?40 c tpt t o b tpt t o c +25 c ?40 c 22 24 26 28 30 32 - 3 - 2 - 1 0 1 2 3 oip3 (dbm) pout/tone (dbm) oip3 vs. pout/tone over temp freq = 1900 mhz 1 mhz tone spacing +85 c +25 c ?40 c 12 13 14 15 16 17 18 -40 -15 10 35 60 85 p1db (dbm) temperature (deg. c) p1db vs. temperature freq.=1900 mhz 0 5 10 15 20 25 30 0 1000 2000 3000 4000 5000 6000 p1db (dbm) frequency (mhz) p1db vs. frequency temp.=+25 c temp.=+25 c 10 15 20 25 30 35 40 0 1000 2000 3000 4000 5000 6000 oip3 (dbm) frequency (mhz) oip3 vs. frequency 1 mhz tone spacing pout=0 dbm.per tone temp.=+25 c 0 2 4 6 8 0 1000 2000 3000 4000 5000 6000 nf (db) frequency (mhz) nf vs. frequency temp.=+25 c temp.=+25 c temp.=+25 c datashe et: rev . e 0 8 / 1 8 /14 - 5 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369184 dc- 6 ghz gain block pin configuration and description pin no. label description 3 rf in rf i nput, matched to 50 o hms. external dc b lock is required. 6 rf out rf o utput / dc supply , matched to 50 o hms . external dc bl k bi h k d d i i i i d 1, 2, 4, 5 gnd rf/dc ground. use recommended via pattern to minimize inductance and thermal resistance. see pcb moun ting pattern for suggested footprint. evaluation board pcb information triquint pcb 10 82269 material and stack - up 1 oz. cu bottom layer nelco n-4000-13 core nelco n-4000-13 1 oz. cu top layer 1 oz. cu inner layer 1 oz. cu inner layer 0.062" 0.006" finished board thickness 0.014" 0.014" 50 ohm line dimensions: width=0.02 9 " spacing=0.0 35 " datashe et: rev . e 0 8 / 1 8 /14 - 6 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369184 dc- 6 ghz gain block package marking and dimensions the top surface of the package is marked with a ?18 4 ? designator and the bottom surface is marked with an alphanumeric lot code. t op bottom bt b b t b b t b b b b b b t notes: 1. dimensions are in milli meters (inches) 2. dimensions and tolerances per asme y14.5m - 1194. package conforms to jedec mo - 203, issue b. pcb mounting pattern 4.064 [0.160] 2x 0.762 [0.030] 0.381 [0.015] 0.762 [0.030] 2.515 [0.099] 2x 1.207 [0.048] 16x ?.254 (.010) plated thru via holes 1.524 [0.060] 2x 0.773 [0.030] 1.301 [0.051] 2x 1.270 [0.050] 6.329 [0.249] 2x 0.203 [0.01] 2x 0.406 [0.016] 6 2x 0.939 [0.037] 4x 0.889 [0.035] 4x 0.889 [0.035] 2x 0.914 [0.036] 2x 0.387 [0.015] notes: 1. all dimensions are in millimeters(inches). angles are in degrees. 2. use 1 oz. copper minimum for top and bottom layer metal. 3. vias are required under the backside paddle of this device for proper rf/dc grounding and thermal dissipation. 4. do not remove or minimize via hole structure in the pcb. thermal and rf grounding is critica l. 5. we recommend a 0.35mm (#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.10?). 6. the rf i/o trace transition shown is to a 30 mil wide line. modify transition as required to interface with other line widths. 1 8 4 datashe et: rev . e 0 8 / 1 8 /14 - 7 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
t qp369184 dc- 6 ghz gain block product compliance information esd sensitivity ratings caution! esd - sensitive device esd rating: class 1 c value: 1000 v and < 2 000 v test: human body model (hbm) standard: jedec standard js - 001 - 2012 esd rating: cl ass c3 value: 1000 v test: charged device model (cdm) standard: jedec standard jesd22 - c101 f solderability compatible with both lead - free (260 ? c maximum reflow temperature) and tin/lead (245 c maximum reflow temperature) soldering processes. con tact plating: nipdau rohs compliance this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). this product also has the following attributes: ? lead free ? halogen free (chlorine, bromine) ? antimony free ? tbbp - a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl rating msl rating: level 1 test: 260c convection reflow standard: jedec standard ipc/jedec j - std - 020 contact information for the latest specifica tions, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: +1.503.615.9000 email: info - sales@t riquint .com fax: +1.503.615.8902 for technical questions and application information: email: sjcapplications.engineering@ triquint .com important notice the information co ntained herein is believed to be reliable. triquint makes no warranties regarding the information contained herein. triquint assumes no responsibility or liability whatsoever for any of the information contained herein. triquint assumes no responsibilit y or liability whatsoever for the use of the information contained herein. the information contained herein is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the user. all information contained herein is subject to change without notice. customers should obtain and verify the latest relevant information before placing orders for triquint products. the information contained herein or any use of such information does not grant, explici tly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. triquint products are not warranted or authorized for use as critical components in medical, life - saving, or life - sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. datashe et: rev . e 0 8 / 1 8 /14 - 8 of 8 - disclaimer: subject to change without notice ? 201 4 triquint www.triquint.com
|
